Publicité
Les langues disponibles
Les langues disponibles
Headboard Bracket Installation Guide (Optional)
A ⁷/16" (11 mm) socket or ⁷/16" (11 mm) wrench is required to complete the
installation.
¹⁄4 "
Headboard
(2)
(4)
Brackets
Bolts
OPTIONAL EQUIPMENT/PART (NOT INCLUDED)
Socket or Wrench ⁷/16'' (11mm)
a) Take 1 headboard bracket (left or right) out of the headboard
bracket accessory box.
Align the slot of the headboard bracket with the white dots marked
on the back of the bed.
b) Use (2) ¹⁄4 " bolts and (2) 6.5mm ID washers to secure the
bracket. DO NOT OVERTIGHTEN! Make sure the headboard
bracket is adjustable.
Attach the headboard brackets to the headboard by using
(4) ST4.2×25 screws and (4) 6.5mm ID washers.
Tighten the headboard bracket with a ⁷/16'' (11mm) socket or
wrench.
4
Repeat Steps 1 to 3 above to add the other headboard bracket to the other side of the
bed (left or right).
6.5mm ID
ST4.2×25
(12)
(8)
Washers
Screws
2
1
1
3
2
4
2
1
Legs Installation Guide
×6
Included in
Accessory Box
(See Page 2
for details)
* Make sure the adjustable legs are properly tight, and the plastic caps
have been placed at the bottom of the legs. Incorrect installation might
cause the part to fail or damage the floor.
Product Serial Number
Each bed has its unique serial number. The serial number can be
found on the metal frame near the legs at the foot area.
Leg Configuration Table
Leg
Configuration
Leg Height
4 "
8¹⁄2 "
12¹⁄5 "
Publicité
