Dynex DX-ESATL Guide De L'utilisateur page 5

Installing the adapter
The following picture can help you to recognize both standard SATA and
eSATA cables. If you do not have an eSATA cable, you must purchase one
from your local dealer.
SATA type A cable (has
an L-shaped key)
System requirements
• ExpressCard-enabled system with an available Express Card
• Windows XP, Windows Vista, or Mac 10.4.x or higher
Installing the adapter
Installing the hardware
To install the ExpressCard adapter:
• Slide the ExpressCard adapter into the Express Card slot of
Download from Www.Somanuals.com. All Manuals Search And Download.
34 mm or 54 mm slot
your notebook computer until it is firmly seated in the slot.
(Refer to the Express Card slot installation instructions in
your notebook computer' s user guide)
Use this connector
eSATA cable (no
L-shaped key)
5