Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1.Prior to switching on, turn volume down to minimum.
2.Connect the audio source to the appropriate input socket.
3.Another speaker can be connected to the output socket, so that
several speakers can be daisy chained.
4.Connect to the mains supply.
5.Switch on the audio source, followed by the active speaker.
6.Set the volume with the applicable control.
7.Adjust the bass + treble.
INSTRUCTIONS
If the speaker is used outdoors, you need to make sure that no
humidity can enter the speaker.
fuse.
below the mounting area.
Always unplug the unit during a thunderstorm or when it is not in
use.
can occur inside the housing. Please let the unit reach room
temperature prior to use.
serviceable parts.
04
o the
110/220V
the
ace.
-
nding
midity.
y.
the
ensation
y user
nothing can be put in it.
SPECIFICATIONS
10" Powered PA Speaker System
System
oofer
Tweeter
Peak Power
Impedance
Sensitivity
Connector
Voltage
and
Active 2-way full range
10"
1"
8ohm
X
<5mV
250mV
110/220v
05
Publicité
