Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS
● Do not overload the speaker to avoid damage to the speaker.
● Do not place an open fire (candles, etc) on top or next to the speaker -
FIRE HAZARD.
● Connect to an earthed mains outlet of 120V/240V 60~50Hz.
●
If the speaker is used outdoors, you need to make sure that no humidity
can enter the speaker.
● When not in use, unplug the unit from the mains.
● Unplug the unit from the mains prior to checking or replacing the fuse.
● Make sure that the speaker is placed on a stable, strong surface.
● The speaker can be hung. Use only strong and approved mounting
material. During the mounting, make sure that nobody is standing below
the mounting area.
● Do not place liquids on the speaker and protect it against humidity .
Humidity can shorten the life time considerably.
● Only use suitable means of transportation if you want to move the
speaker - BEWARE OF YOUR BACK !!
● Always unplug the unit during a thunderstorm or when it is not in use.
● If the unit has not been used for a long period of time, condensation
can occur inside the housing. Please let the unit reach room temperature
prior to use.
● Never try to repair the unit yourself. It does not contain any user
serviceable parts.
● Run the mains lead in such a way that nobody can fall over it and
nothing can be put on it.
● Set the unit to the lowest volume prior to switching it on.
● Keep the unit out of the reach of children.
04
SPECIFICA TIONS
15" Powered PA Speaker System
System
Woofer
Tweeter
RMS power
Peak Power
Impedance
Frequency Range
Sensitivity
Connector
Mic Input Level
Line Input/Output Level
Voltage
Active 2-way full range
15"
1"
300W
1500W
4 ohm
50Hz- 18KHz
94dB (+/- 2dB)
XL R/6.35mm/RCA
<10mV
250mV
120/240v AC 60/50Hz
05
Publicité
