Publicité
Les langues disponibles
Les langues disponibles
4
Attaching Plastic Feet (Optional)
NOTE: 4 Plastic Feet are located in bag
found in top till.
□
Insert plastic foot into hole on bottom of chest.
Repeat for other 3 feet.
Operation
1
Removing the drawers
□
Fully extend the empty drawer.
□
Push up the one release lever while pulling down
on the other release lever.
□
Pull the drawer outward until it is released from the
drawer slide.
3
Usage of top till rubber grommet
□
When passing cords into the box, be sure to always
enter box from the rear. After head of cord is in place,
slightly pull back 2-3" to ensure weather resistant "star
bursts" are facing toward the outside of box. Never
push the cord from inside box so that mating plug
points are exposed to the environment.
□
BE SURE TO FOLLOW ALL ELECTRICAL SAFETY
PRECAUTIONS.
2
Re-inserting the drawers
□
Extend the drawer slides.
□
Insert the brackets on each side of the drawer into
the slots in the slides, being careful that they are
properly positioned.
□
Once properly inserted, completely close the drawer
to set the slides in their proper positions.
8
Publicité
