Publicité
Les langues disponibles
Les langues disponibles
2 Description of the machine
2.1 General description
A. Eye protection shields
B. Workpiece bearing plate
C. ON/OFF switch
D. Eye protections shields brackets
E. Wheel cover
F.
Plug
2.2 Technical data
Model
Voltage
Motor power
Grinding wheel dimensions (Ø x base x Ø shaft hole)
Alu oxide grinding wheel dim. (Ø x base x Ø shaft hole)
Grinding wheel speed
Machine weight
Machine dimensions (l x w x h)
3 Installation
3.1 Site requirements
In order to provide for good functionality and high machining accuracy as well as a long durability of the machine, the site
should fulfil following criteria :
•
The machine must be installed in a dry and well ventilated place.
•
Avoid places with machines generating harmful chips or dust.
•
Avoid place with machines generating vibrations such as planing machines, presses, etc.
•
The machine should be installed on an even and horizontal surface.
•
Protruding parts (stops, handles, etc.) need to be secured to avoid danger for persons.
•
Provide sufficient space for assembly, operating and servicing.
•
Provide sufficient lighting (minimum 500 lux). If necessary, provide additional lighting.
•
The access to the power plug must be kept free.
•
For 400 V machines:
Imperatively make sure that all 3 phases (L1, L2, L3) are connected correctly. Most of the defects on motors are resulting
from wrong connections. For instance, if a motor phase is not correctly clamped or connected to the neutral conductor (N).
This may cause:
- That the motor becomes hot very rapidly.
- That the motor noises increase.
- That the motor has no power.
A wrong connection of the machine invalidates the guarantee.
3.2 Assembly
1. Assemble the eye shields, spark breakers and workpiece bearing plates using the screws, etc. provided.
2. Make sure there is not more than 1/6'' (1.6 mm) between those items and the edge of the grinding wheels.
3. It is advisable to secure the bench grinder to the workbench or stand.
ME15ES
230 V
520 W
150 x 25 x 32 mm
200 x 40 x 20 mm
2950 min
-1
19 kg
555 x 285 x 325 mm
12
M1.4.ME15ES.NLFREN - 14112019
EN
Publicité
