Publicité
Les langues disponibles
Les langues disponibles
"CLICK N GO 2" FRAME ADAPTOR
Arctic Cat 1000
4) Drill holes using the drilling tool provided for this purpose (Kimpex product No. 373920)
(see Figure 4). If you don't have the tool, remove the skid plates and drill with a ½ inch drill bit. Reinstall the skid
plates afterwards.
Fig. 4
5) Pass three (3) U-bolts
Fig. 5
6) Pre-assemble the four (4) mounting plates
M8-1.25 self-locking flange nuts
Fig. 6
KIMPEX INC. / 5355, rue St-Roch / Drummondville (Québec) Canada / J2B 6V4
KIMPEX USA / 100 Walnut Street / Champlain, New York / 12919
A-7815010-1 • Printed in Canada
ASSEMBLY INSTRUCTIONS
in the holes previously drilled (see Figure 5).
07
07
05
using the four (4) M8-1.25 x 25 mm carriage bolts
06
(see Figure 6). Do not tighten at this step.
03
02
06
03
373951
KIMPEX NO.
and four (4)
02
-1
3
Publicité
