Publicité
Les langues disponibles
Les langues disponibles
EN
Possible problems
The jack
The jack lifts
can't lift
loads but
a load
cannot
maintain
them at a
normal
height
Χ
Χ
Χ
Χ
Χ
Χ
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these
changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you
hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included in the
product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or replacement work, including
maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or
even serious injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-
conforming equipment.
4
The jack's
Low lifting
arm cannot
performance in
go all the
relation to the
way down
press applied
Χ
Lifting capacity:
Lifting range:
Dimensions:
Weight:
WWW.NIKOLAOUTOOLS.GR
Troubleshooting
The jack
cannot lift
vehicles to
the
maximum
point
Χ
Χ
Χ
Χ
Χ
Technical data
2 tons
85-330 mm
534x216x135 mm
10,5 kg
The jack's
handle returns
to its original
point on its
Possible problems
own when the
and solutions
jack is under
load
The release valve is
not properly
closed.
There is air in the
hydraulic system of
the jack. Purge the
Χ
air.
The jack's oil level
is too low. Add oil.
The jack's oil
level is too high.
Drain the oil.
The jack is not
working properly.
Replace the pump.
Η αντλία του
Publicité
