Electrolux Pedestal Notice D'utilisation page 9

x5
5. Lay gently the washing machine on the
detergent compartment side.
6. Loosen the washing machines adjusting feet
using the key supplied with your washing machine,
then undo 5 complete turns.
If the feet are already partly
undone, you must first screw
them on again and then undo 5
complete turns.
7. Slide the stand under the washing machine so
that its front adjusting feet match the stands front
brackets and the rear bracket is positioned against
the machines back.
8. Screw the rear bracket onto the machines back
using one of the supplied screws.
9. Return machine and stand to a vertical position,
and screw the other bracket onto the stand and
the machines back using the remaining supplied
screws.
10. The stand is now installed; check whether your
washing machines back feet rest on it . Otherwise
undo them using the key supplied with your
washing machine.
9