Publicité
Les langues disponibles
Les langues disponibles
4.
Remove the new filter from its packaging or take the clean filter and insert it in the
filter compartment.
5.
Put the filter cover back into place: lock the bottom of the cover in the bottom of
the housing [1] and click into place [2].
•
Ensure the filter handle sits on the outside when the filter is installed.
•
Only replace the filter with a similar filter (Velleman order code AIRPD001SP).
6.
Connect the appliance to the mains and switch on the appliance. Press and hold
the purification button to reset.
Control Panel Description
Press this button to start the purification process. The LED will burn.
Press again to stop. The LED will switch off.
Press this button to start the dehumidification with purification process. The LED will
burn.
Press again to cancel the dehumidification process. The purification process will continue
working and the LED will still burn.
V. 01 – 27/04/2020
AIRPD001
REMARKS
5
©Velleman nv
Publicité
