General Information; Liability And Warranty - Hazet 2152-5 Notice D'utilisation

1. General Information

• Please take care that the user of this test-
ing device carefully reads these operating
instructions and understands all information
given in there before the first use.
• These operating instructions contain impor-
tant advices that are necessary for a safe
and trouble-free operation of your HAZET
testing device.
• For effective use of the testing device as
intended, it is essential that all safety and
other information in these operating instruc-
tions is adhered to.
• For this reason, always keep these operating
instructions together with your HAZET test-
ing device.
• This testing device has been designed exclu-
sively for particular applications. HAZET
emphasizes that any modification of this
device and/or an application that does not
correspond to its intended application is
strictly forbidden.
• HAZET will not be liable for any injuries to
persons or damages to property that are due
to an improper application or misuse of this
tool respectively due to the disregard of the
safety instructions.
• Furthermore, the general safety regulations
and regulations for the prevention of acci-
dents being valid for the application area of
this device have to be observed, too.
18 18
1 For Your Information
Nicht an Motorsteuergeräten verwenden! Do not use on electronic control units!
2. Explanation of Symbols
ATTENTION: Please pay attention to these
symbols!
Read the Operating Instructions!
The operator is obliged to observe
the operating instructions and has to
instruct all users of the testing device
according to the information given in
this manual.
NOTICE!
This symbol marks indications which
help you to use the device.
CAUTION!
This symbol marks important specifi-
cations, dangerous conditions, safety
risks and safety advices.
ATTENTION!
This symbol marks indications whose
disregard results in damage, malfunc-
tion and or functional failure of the
device.

3. Liability and Warranty

• Any deviation from the intended use and/
or any misapplication of the testing device
is not allowed and will be considered as
improper use.
• Any claims against the manufacturer and/
or its authorized agents because of dam-
age caused by improper use of the testing
device are excluded.
• Any personal injury or material losses caused
by improper use are the sole responsibility of
the operator and user.
4. Disposal
• For disposal, disassemble device according
to regulations for environmental protection
and for work safety. Components can be
recycled.
• Metalic components can be scrapped.
• Components made of plastic can be recy-
cled according to regulations for recycling of
plastics.
• Recycle other components according to the
regulations applying to their composition.