Atlantis Land A02-RA241 Guide De Démarrage Rapide page 28

255.255.255.0. The best and easy way is to configure the
PC to get an IP address from the WebShare 241 Router
ADSL2+ (DHCP client).
Please follow the steps below for PC's network environment
installation. First of all, please check your PC's network
components. The TCP/IP protocol stack and Ethernet
network adapter must be installed. If not, please refer to MS
Windows relative manuals.
Before you configure this WebShare 241 ADSL Router2+,
you need to know the following default settings:
•
Username:admin
•
Password:atlantis
•
IP address (192.168.1.254), Subnet Mask
(255.255.255.0)
•
DHCP Server: enable
1.6 IE Configuration
Now open IE, go to Instruments menu, select the
Connections tab and select one of the following options:
•
Never use remote connection
•
Use
connection isn't available
1.7 TCP/IP Configuration
Configuring PC (Windows 95/98/ME)
1. Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and choose the
Configuration tab.
2. Select TCP / IP -> NIC Compatible, or the name of
any Network Interface Card (NIC) in your PC.
remote connection
ENGLISH
if another network
28