HAMPTON BAY BRAMFORD L-GZ669PST-I Manuel D'emploi page 17

Assembly
1
Assembling the screen
□
Insert the screen 1 (D1) into the corner screens (E1 and E2) and
secure them using bolts (AA) and flat washers (BB). Repeat for
the other screen 1 (D) and corner screens (E1 and E2).
□
Insert the screen 2 (D2) into the corner screens (E1 and E2) and
secure them using bolts (AA) and flat washers (BB). Repeat for
the other screen 2 (D2) and corner screens (E1 and E2).
3
Assembling the netting beam
□
Secure the long netting tube (T) to the post 1 (D1) and corner
screen E using bolts (AA) and flat washer (BB). (Use the same
way to assemble short netting tube (U) to screen 2 (D2) and
corner screen (E)).
2
Assembling the beam connector
□
Secure the beam lower connectors (F) to the corner screens (E1
and E2) using bolts (AA) and flat washers (BB).
□
Secure the middle beam connectors (G) to the screens (D1 and
D2) using bolts (AA) and flat washers (BB).
4
Assembling the top frame
□
Connect the two top frames (H) together using bolts (AA) and flat
washers (BB).
□
Secure the beams (I) to the top frames (H) using bolts (AA) and
flat washers (BB).
6