RM ST-708 G Notice D'installation Et D'emploi page 13

INSTRUCTIONS FOR USE
gnition of the burner and regulation of the performance
Turn the regulation knob of the competent burner (1) into position „ignition of the main burner" and then
press it down and hold it. Ignite the burner with piezzo lighter (2). After ignition of the burner hold the knob (1)
pressed several seconds till the thermofuse gets hot. Then release the button. If the fl ame goes out repeat
the whole process once more.
Lower performance sporo:
By turning the knob (A) into position „sporo" you set the burning of the burner for sporo (lower performance)
How to switch the burner off:
Turn the knob (A) into position"0".
1 2
The possibility of a visual inspection of the pilot burner fl ame, remove the center plate by hook which are
included.
1
BURNER KONTROL KNOB
1
2 PIEZZO LIGHTER
Switched off
ignition of the main burner
Full power
Lowered power