PSH Pools MICRO.2 Serie Mode D'emploi Et D'entretien page 8

Manual MICRO.2_PSH 21/12/12 13:00 Página 8
Instruction Manual for Series MICRO.2
Compulsory check by starting up and functioning of the pump:
Prime the pump (if not risk of dry running). WAR-
RANTY LOSS!!!
Do not use any reduction at suction and drive
mouths
Pay attention on the cable position in order to prevent water seeping into the terminal box.
CORRECT! Prevent the entry of water through the
electrical cable
Daily cleaning of the prefilter basket.
Install the pump in a well ventilated room or protected from weather impacts.
Do not substitute the instruction manual enclosed!
Regularly check the waterproofness! (A leak
through a mechanical seal can cause important
damages!)
Starting up only with open valves
INCORRECT!
In order to avoid mechanical seal blocking, turn
the shaft trough the motor fan before starting up
or after extended unuse!