Skil PWRCORE 20 RO5028-00 Guide D'utilisation page 9

OPERATING INSTRUCTIONS
WARNING
fluid or allow a fluid to flow inside them.
certain industrial chemicals, and bleach or bleach-containing products, etc. can cause a short
circuit.
WARNING
could result in serious personal injury.
WARNING
modification is misuse and could result in a hazardous condition leading to possible serious
injury.
This cordless Bluetooth speaker must be used only with the battery packs and chargers
listed below:
2Ah
SKIL BY519701
SKIL BY519702
NOTICE:
Please refer to the battery and charger manual for detailed operating information.
To Attach Battery Pack (Fig. 2)
a) Align the raised portion on the battery pack
(not included) with the grooves on the back
of the Bluetooth speaker, then slide the
battery pack onto the Bluetooth speaker as
shown.
b) Make sure that the latch on the battery
pack snaps into place and that the battery
pack is secured to the tool before beginning
operation.
NOTICE:
When placing the battery pack onto
the tool, be sure that the raised rib on the
battery pack aligns with the groove inside
the tool and that the latches snap into place
properly. Improper attachment of the battery
pack can cause damage to internal components.
To Detach Battery Pack
Depress the battery-release button, located on the front of the battery pack. To release the
battery pack, pull the battery pack out and remove it from the speaker (Fig.2).
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack or charger in
If any parts are damaged or missing do not operate this product until
the parts are replaced .
Do not attempt to modify this speaker or create accessories not
recommended for use with this speaker .
Battery Pack
2.5Ah
SKIL SKIL
BY519703 BY519601
Corrosive or conductive fluids, such as seawater,
Use of this product with damaged or missing parts
4Ah 5Ah
SKIL
BY519603
Fig. 2
Any such alteration or
Charger
SKIL SKIL
SC535801 QC536001
Detach
Attach
Battery-
Release
Button
9