Publicité
Les langues disponibles
Les langues disponibles
AUTO
1
ROOM TEMP
SET TEMP
FUNDAMENTAL ISSUE
°F
AUTO
2
°F
°C
°C
TIMER
H
1 2 3 4
Attention!
When your ceiling fan has a switch to reverse the rotation from summer to winter
TIMER
H
mode you may only change the setting when the blades are standing still (motor OFF)! If
this fundamental issue is not observed, any resulting damage to the motor and/or the remote
control is not covered by the warranty.
Operation and functions of the remote control FB-FNK Advanced
Button
1
ROOM TEMP
AUTO
SET TEMP
°F
AUTO
2
°F
°C
°C
TIMER
H
1 2 3 4
TIMER
FAN
H
ON/OFF
1
ROOM TEMP
AUTO
SET TEMP
°F
AUTO
2
°F
°C
°C
TIMER
H
1 2 3 4
TIMER
H
LIGHT AND
DIMMER
AUTO
1
ROOM TEMP
SET TEMP
°F
AUTO
2
°F
°C
°C
TIMER
H
1 2 3 4
FAN TIMER
TIMER
H
LIGHT
TIMER
1
ROOM TEMP
AUTO
SET TEMP
°F
AUTO
2
°F
°C
°C
TIMER
H
- The indication on the display is switched off after approx. 40 seconds of no button activity.
1 2 3 4
Touching any button will switch on the display again.
TIMER
H
- The symbol „Low Battery" lights up in case of a low battery voltage (see overview on p. 10).
LC-Display/FUNCTION
FAN-LC-DISPLAY
ROOM TEMP
AUTO
1
SET TEMP
°F
AUTO
2
°F
°C
°C
TIMER
ROOM TEMP
AUTO
1
SET TEMP
H
°F
AUTO
2
°F
1 2 3 4
°C
°C
FAN ON (Speed 4)
TIMER
TIMER
H
LIGHT DISPLAY
1 2 3 4
H
TIMER
H
LIGHT AND DIMMER ON
AUTO
1
ROOM TEMP
SET TEMP
°F
°F
AUTO
2
°C
°C
TIMER
ROOM TEMP
AUTO
1
SET TEMP
H
°F
AUTO
2
°F
1 2 3 4
°C
°C
FAN TIMER SETTING
TIMER
TIMER
H
1 2 3 4
H
TIMER
H
LIGHT TIMER SETTING
Delayed off function (99
sec.) of fan and light, e.g.
when you leave the room.
Description
- Push the button once and the fan switches on.
Push the button again and the fan switches off.
- In order to protect the motor, the fan starts out at
the highest speed. After 5 seconds the control unit
switches to the desired speed.
- For switching between speeds 1 and 4 you must
push the buttons “/”.
A short push of the button switches the light on
in the preselected dimmer setting. Push the but-
ton again and the light switches itself off.
- Longer pressing (> 0,6 sec.) the button slowly
dims the light.
If switch 5 (see page 14) is on (Energy saving
lamp), only Light ON/OFF is possible.
- Press the FAN-TIMER button - the light timer sym-
bol blinks on the display.
- With the buttons “/” you are able to adjust the
time at which the fan switches itself off, ranging
from 30 minutes to 24 hours.
- By pressing and holding (> 1 sec.) the button FAN-
TIMER the setting is deleted.
- Press the LIGHT-TIMER button - the fan timer
symbol blinks on the display.
- With the “/” buttons you are able to adjust the
time at which the light switches itself off, ranging
from 30 minutes to 24 hours.
- The setting is deleted by pressing and holding
(> 1 sec.) the LIGHT-TIMER button.
- Pressing the button DELAY OFF activates the
symbol TIMER on the LCD display. The delayed off
function counts back from 99 to 0. The light and the
fan are switched off when the delay time expires.
GB
15
Publicité
