Publicité
Les langues disponibles
Les langues disponibles
EN
5.
Attach the roof to the ends of the four legs of the frame using the snap connectors.
6.
Ensure that the tent is completely open and that the four legs of the frame are not twisted.
7.
Connect the pump, preferably to the valve below the pressure gauge. This means you can see the pressure the entire time
you are pumping it up.
8.
Pump the frame fully to a pressure of 3.6 psi. The battery pump switches off automatically as soon as the set pressure is
reached. The electric pump has to be switched off manually.
9.
(Optional) Attach the side walls.
5.
7.
9.
Full
sidewall
6.
8.
Window
Panoramic
sidewall
window wall
Door wall (vertical
Roll up
zipper)
door wall
Publicité
