Publicité
Les langues disponibles
Les langues disponibles
MIDI USB INTErfACE »MIDI 1I1O«
The in the USB plug integrated interface makes the TIE Studio MIDI
lilo very leight and consolidated. It is the easiest way to connect
MIDI Hardware with Windows or MAC Computers. A current chip set
guarantees lowest latency and a stable timing. The power is supplied
via USB, real Plug & Play makes a driver installation irrelevant.
Features
• USB MIDI-Interface
• 1x MIDI-In, 1x MIDI Out
• Interface integrated in USB Plug
• Power supply via USB
• Plug & Play, driver installation irrelevant
• USB Class Compliant for Windows and MAC OSX
• Total length: approx. 2 m
Please follow the steps:
1. Connect the cable marked „IN" to the MIDI „OUT" socket of a
MIDI keyboard (or MIDI device).
2. Connect the cable marked „OUT" to the MIDI „IN" socket of a
MIDI keyboard (or MIDI device).
3. Plug the USB cable into any free USB socket on your computer,
the red LED will light to show power on.
4. Open music software programm, e.g. Cubase, Sonar, Midi Con-
nections, etc.
5. Set the music programms MIDI In and MIDI Out devices to „USB
Audio Device".
6. Your USB to MIDI interface is now ready for use.
To save potential problems, it is recommended that this interface is
always connected to the same USB as it was originally installed on
USB to prevent multiple installations of the driver.
Publicité
