Danfoss FH-CWT Instruction page 8

5. Frost Protection Mode
Set the thermostat to Frost Protection Mode by
turning the knob to the position
Fig. 3 .
• When the room temperature drops below 5 °C
the heating will be turned ON.
• When the room temperature raises above 6 °C
the heating will be turned OFF.
6. Technical Specifications
Feature
Approval
Colour
Dimensions
Adjustment mode
Fault indication/
failure mode
Frost protection
Ambient temperature
8
VI.CU.A2.2D
Instruction FH-CWT Thermostat
Description
CE Marking, EN 60730
White RAL 9016/ Grey
RAL 7011
86 Χ 99 Χ 29mm
Dial
If sensor failure, ther-
mostat will turn off all
output of relays
Yes, put the dial to posi-
tion
- 10 °C – 60 °C
Produced by Danfoss Floor Heating Hydronics 05.2011
on the scale -
(5 °C)