Habitat Herve Mode D'emploi page 3

EN
This manual contains important information that should be kept
for future reference.
Material
Cover (Savoy): semi aniline leather of cow.
Mod. A :
Revêtement tissu(Copparo) : 100% polyester.
Mod. B :
Revêtement tissu (Velours) : 100% polyester.
Mod. C :
Revêtement tissu (Melina) : 85% polyester, 15% acrylique.
Mod. D :
Revêtement tissu (Bormio) : 100% polyester.
Mod. E :
Revêtement tissu (Alba): 100% polyester.
Mod. F :
Revêtement tissu (Bellagio) : 51% coton, 28% viscose, 7% lin,
7% polyester, 6% acrylique, 1% polyamide.
Mod. G :
Revêtement tissu (Lucca) : 59% polyester, 17% coton, 16% viscose,
8% lin.
Mod. H :
Revêtement tissu (Venezia) : 62% polyester, 17% coton, 14% viscose,
7% lin.
Top of layer of seat cushion and back cushions : 50% duck feathers
and 50% goose feahers.
Padding of seat cushion : foam polyurethane 35 kg/m
Padding of back cushions : foam polyurethanne 23 kg/m
polyurethanne 25 kg/m .
3
Padding of armrests: foam polyurethane 30 kg/m
Structure : plywood.
Suspensions : webbing.
Feet : solid oak oiled.
Recommendations for use
This product was designed for indoor use only.
Do not stand on the product.
Do not sit on the armrests.
Beware of sharp objects.
Maintenance
Fabric coating
Vacuum or brush the cloth once a week. Dust accumulation
accelerates wear and the colors from fading.
Spills should be removed immediately with a clean and dry
dabbing to absorb the liquid. Do not rub, it may damage the fabric.
Variations in color between the surfaces cleaned and uncleaned
might appear. Avoid direct and prolonged exposure of the product
to sunlight. The colors may fade.
Do not place the product near a heat source (radiator, fireplace...)
nor a moisture source. The heat and humidity can damage the
product.
Do not use abrasives.
Leather coating
Do not sit on the leather with damp or wet clothes.
Clean every 2 months with a slightly damp soft cloth. Then wipe
with a dry cloth.
Use a cleaning kit for upholstery leather.
Feeding the leather regularly so that it keeps its flexibility.
If in doubt, call a professional to carry out cleaning.
Keep the label with lot number, it may be useful in case
BC
of complaint.
If you have any comments or suggestions regarding this product,
assembly instructions or service received, please enquire at your
nearest store or contact us on our website at: www.habitat-design.
com or write to this address: HABITAT, 70 AVENUE VICTOR HUGO,
93300 AUBERVILLIERS FRANCE.
Herve - 05/2023
.
3
and foam
3
.
3
The packaging elements are to be sorted out according to local
requirements. Make the right sorting choice and give them a
second life!
By sorting out this manual you contribute in preserving
the environment. This manual can still be found on
www.habitat-design.com.
2