Télécharger Imprimer la page

FoxInsights FoxPressure Manuel D'utilisation page 16

Masquer les pouces Voir aussi pour FoxPressure:

Publicité

Les langues disponibles

Les langues disponibles

Notes on installation
First modify the cable length to fit your tank. In general, we recommend adjusting
the length so that it is equivalent to the tank height + offset + 5 cm.
Then lower the pressure probe of the FoxPressure slowly (!) into the tank until it
rests on the bottom of the tank. Dropping the probe in a sudden manner should
be avoided, as the FoxPressure could be damaged. Please also note that the
connection of the upper end of the pressure probe with the cable may be
stressed with max. 25N on tension.
In addition, the part of the cable that is in the tank should be enclosed in a tube.
This prevents the probe from being thrown around in the tank during filling and
possibly being damaged. Alternatively, the measuring probe should be removed
from the tank during the filling process.
You can find detailed instructions for installation in the FoxMobile app.
16
Max. Measured
value: 350cm
(heating oil)
Cable length:
3 m or 5 m

Publicité

loading