LG LRTLS2403 Serie Manuel D'utilisateur page 10

WATER VALVE INSTALLATION
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
CAUTION: Unplug the refrigerator power cord from the outlet.
TOOLS YOU WILL NEED
Flat blade and
Phillips screwdrivers
INSTALLATION INSTRUCTIONS
(Only for models; LTCS20120*, LTCS20020*
and LTCS20040*)
1. REMOVE THE BACK COVER
R emove the back cover of the refrigerator
using a Phillips screwdriver.
2. CONNECT THE WATER VALVE WIRE HARNESS
Facing the back of the refrigerator, locate the
wiring harness for the water valve at the lower
right side. Plug the connector of the water
valve harness onto the refrigerator terminals.
locker
1
4
housing water valve
3. ATTACH THE WATER VALVE
Fasten the water valve to
the back of the refrigerator
using one Phillips screw
NOTE: Make sure the fill tube
connection on water valve is secure.
3
2
5
6
housing refrigerator bottom
.
7
2
1
5 4
10
locker
3
2 1
6
4
5
4
direction of combined
7