TOOLCRAFT MW-623 Mode D'emploi Original page 22

d) Power tool safety warnings
• Only use batteries that are specifically designed for this power tool. Using other batteries might result in
injury and/or fire hazards.
• Observe the safety and handling instructions in the original operating instructions of the battery and its
charging device.
• Never leave the appliance unattended when it is connected to the battery. Remove the battery before
moving away from the appliance.
e) Workstation safety
• Keep your workstation clean. Keep the work area well lit. A disorganised workstation or poor lighting can
cause accidents.
• Keep children and other people away from the workstation! Distractions can cause accidents.
• Ensure that your working area is well ventilated.
• Never use the product next to or near flammable liquids or gases, air/gas mixtures (petrol vapours) or
flammable solids/dust. Sparks may be generated when the product is used – risk of fire or explosion!
f) Specific safety instructions for multi-purpose tools
• Always hold the multi-purpose tool by the insulated handles. The insertion tool could come into contact
with hidden power lines and energise the metal parts of the appliance. Risk of electric shock!
• Keep body parts away from the insertion tool during operation.
• Never touch the rotating insertion tool. Risk of injury! The insertion tool continues to move for a short
period after the device is switched off.
• Never reach under or behind the workpiece while working. Your hands could come into contact with the
moving insertion tool protruding from the workpiece and sustain an injury.
• Wait until the motor has come to a complete standstill before placing the multi-purpose tool on a surface.
• Fix the workpiece in place with suitable means. Never hold the workpiece in your hands or resting on
your legs.
• Working with materials that contain asbestos, lead paints and certain types of wood or metal may
generate dust that is dangerous to your health. Contact with and inhalation of this dust is dangerous
to the operator and nearby persons. For this reason, wear safety goggles and a dust mask and ensure
appropriate dust extraction.
• Only use the multi-purpose tool on dry materials. If moisture enters an electrical appliance, it increases
the risk of short circuits and electrical shock.
22
All manuals and user guides at all-guidesbox.com