Publicité
Liens rapides
Publicité
Manuels Connexes pour Level One WAP-6121
Sommaire des Matières pour Level One WAP-6121
- Page 1 Quick Installation Guide WAP-6121 & WAP-8121 QIG : V1.3 HW : V2 & V3...
- Page 3 Content Hardware and Operation mode Instruction (WAP-6121)…………1 Hardware and Operation mode Instruction (WAP-8121)…………2 Interface Description ( WAP-6121 & WAP-8121 )…………………3 English…………………………………………………………………4 Deutsch………………………………………………………………..5 Français………………………………………………………………..6 Español…………………………………………………………………7 Português………………………………………………………………8 Italiano………………………………………………………………….9 Figure 1……………………………………………………………….10 Figure 2……………………………………………………………….10 Figure 3……………………………………………………………….11 Figure 4……………………………………………………………….11 Package Contents 1.Screw Kit 2.RJ45 Network Cable 3.Quick Installation Guide...
- Page 4 Hardware and Operation mode Instruction ( WAP-6121 ) 1. Front Panel : LED Light State description Color Status Description The WAP-6121 is not receiving power. Green Device Startup state. Green Fast Blinking Reset to Defaults. Blue 2.4G WIFI SSID Broadcast ON...
- Page 5 l Hardware and Operation mode Instruction ( WAP-8121 ) 1. Front Panel : LED Light State description Color Status Description The WAP-8121 is not receiving power. Device Startup state Green 2.4G WIFI SSID Broadcast ON Blue 5.8G WIFI SSID Broadcast ON Red, Green, Blue Fast Blinking Reset to Defaults...
- Page 6 Interface Description WAP-6121 & WAP-8121 Button / Interface Description LAN port The LAN port is used to connect to network (10/100Mbps RJ45 port) devices, such as a switch or PC / NB The WAN/POE port is used to connect to network...
- Page 7 English Default Settings IP Address 192.168.188.253 Password admin Hardware Installation Power on the Device. To power on the AP, you can use one of the following methods: 1. Plug one end of your Ethernet cable into the WAN port of the AP, and the other end into a port on a PoE switch or a 802.3af PoE injector.
- Page 8 Deutsch Standardeinstellungen Standard-IP-Adresse 192.168.188.253 Kennwort admin Hardwareinstallation Gerät einschalten Zum Einschalten des AP können Sie eine der folgenden Methoden verwenden: 1. Verbinden Sie ein Ende Ihres Ethernet-Kabels mit dem WAN-Anschluss des AP und das andere Ende mit dem Anschluss an einem PoE-Switch oder einem 802.3af -PoE-Injektor.
- Page 9 Français Réglages par défaut Adresse IPpardéfaut 192.168.188.253 Mot de passe admin Installation de l'équipement Mettre l'appareil sous tension. Pour alimenter le AP, vous pouvez utiliser l'une des méthodes suivantes : 1. Brancher une extrémité de votre câble Ethernet dans le port WAN du AP, et l'autre extrémité...
- Page 10 Español Configuración predeterminada IP predeterminada 192.168.188.253 Contraseña admin Instalación del hardware Encienda el dispositivo. Para encender su AP, puede utilizar uno de los métodos siguientes: 1.Enchufe un extremo del cable Ethernet al puerto WAN de su AP y el otro extremo al puerto de un conmutador PoE o de un inyector PoE 802.3af.
- Page 11 Português Predefinições IP predefinido 192.168.188.253 Palavra-passe admin Instalação de hardware Ligar o dispositivo. Pode usar um dos seguintes métodos para ligar o AP: 1. Ligue uma extremidade do seu cabo Ethernet à porta WAN do AP e a outra extremidade a uma porta num comutador PoE o injetor PoE 802.3af. 2.
- Page 12 Italiano Impostazioni predefinite IP predefinito 192.168.188.253 Password admin Installazione dell'hardware Accendere il dispositivo. Per accendere AP, utilizzare uno dei seguenti metodi: 1. Inserire un'estremità del cavo Ethernet nella porta WAN di AP, e l'altra estremità in una porta dello switch PoE o dell'iniettore PoE 802.3af. 2.
- Page 13 Figure 1 Figure 2 -10-...
- Page 14 Figure 3 Figure 4 -11-...
- Page 15 -12-...