BGS technic 6880 Mode D'emploi page 9

DIFFERENT WAYS OF CLEANING
•
General Cleaning - Use only tap water. Use warm temperature about 50°C.
•
Enhanced Cleaning - Add few drops of standard washing up Iiquid, liquid soap, or detergent into
water, other non-acidic cleaning agents can also be used.
•
Extensive Cleaning - Removing tarnish, carbon &.rust from non-plated metals, it is
recommended to use specialist cleaning solution in associated with using ultrasonic cleaner.
WARNING
Strong acid or alkaline cleaning solution will cause corrosion, rust and even puncture of tank or
machine body. To overcome this problem, dilute to mild PH solution or request for tank made of
specific grade of stainless steel. The cleaning solution will deteriorate in effectiveness over time and
use. It is important to regularly change the fluid and carefully wash the inside of the cleaning tank in
order to preserve the effectiveness and longevity of the cleaner. Do not use corrosive or abrasive
cleaning products on the tank, which must be wiped down and dried before it can be re-connected to
the electrical supply.
NOTE: If the machine starts to spark, smoke, smell of burnt electrics or displays any other fault the
operator must immediately stop the machine, isolate the electrical supply and contact the supplier.
Continued use is dangerous.
FOR BETTER CLEANING EFFECT
• The item should be immersed well into the water. NOTE: Do not exceed the "MAX" mark.
• Warm water (never hot or boiling) and a small amount of washing up liquid will help increase the
cleaning performance.
• Make sure there is good space around each part you put in the tank, the more items that you
place in the tank the less efficiently it will clean. It is not advised to overlap items. If lay items one
on top of the other the system doesn't work the way it's supposed to.
• Basket use. Do not put items directly into the bottom of the tank, better cleaning effect with a
suitable basket. A metal basket absorbs less ultrasonic energy at about 8%.
• Temperature: The higher temperature the better cleaning effect. However, when temperature
exceed 70°C-80°C, cleaning effect will be affect. The best temperature we suggest is 40°C-60°C.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment.
DISPOSAL
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to an electrical
appliances retailer.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed