Craftsman 19A30042791 Manuel D'installation

EXTREME MULCH KIT 54" DECK
Model No. 19A30042791
Model 19A30042791 mulch kit is designed for use with select 54-inch triple-blade
stamped cutting decks and fabricated cutting decks. Refer to your tractor's Operator's
Manual to assure compatibility.
Carton Contents
Before beginning installation, remove all parts from the carton to make sure
everything is present. Carton contents are listed below and shown in Figure 1. Part
numbers are shown in parentheses.
• Three Mulching Blades (942-05056-X)
• One 54" Deck Mulch Plug Assembly (631-05178)
• One Wing Knob (720-04122)
• One Chute Adapter (731-10133)
Figure 1
Blade Installation
Before beginning installation, place the tractor on a firm and level surface, set the
parking brake, place the PTO in the disengaged (OFF) position, stop the tractor's
motor and remove the ignition key to prevent unintended starting.
Cutting blades are sharp. Always protect hands by wearing heavy leather work
gloves to grasp blades.
1. Gently flip the deck over to expose its underside.
2. Stablize one of the cutting blades with a blade lock tool or a block of wood.
See Figure 2.
INSTALLATION MANUAL
WARNING
WARNING
Figure 2
Form No. 769-18891
(November 9, 2018)