Krüger & Matz KM0232-S Mode D'emploi page 18

CI+ slot
HDMI input
USB input
AV composite input
SPDIF (Coaxial) output
RJ-45
CONNECTING TO THE INTERNET
The TV set can be connected to the network in two ways:
• Wired, using the RJ-45 port.
• Wireless, using Wi-Fi network.
Connecting to a wired network
1. Ensure you have:
• LAN cable long enough to reach your TV set.
• Router or modem with available RJ-45 port;
• High-speed internet connection.
2. Connect LAN cable to the router and to the RJ-45 port.
3. Enter Network Settings to configure the Internet connection.
• Go to: Settings – System – Network Configuration – Wired – Configuration.
• Adjust options and confirm with OK button.
4. The TV set should have connected to the selected wired network.
Connecting to a wireless network
1. Ensure you have:
• High-speed internet connection.
2. Go to: Settings – System – Network Configuration – Wireless – press right arrow
on the remote control to turn it on – Wireless Access Point.
3. Select desired Wi-Fi network, enter password if required and confirm with OK
button.
4. The TV set should have connected to the selected wireless network.
18
Technology that allows you to insert a CI
module that allows your TV set to receive
scrambled TV channels.
Transmits video and audio data from external
device such as DVD or Blu-Ray player, video
game console or PC (with compatible video
card) to your TV set with a HDMI cable.
Connect USB storage device.
Designed to transmit video and audio data
from external devices such as PVR, camera,
DVD player, video game console to the TV set
with RCA cable.
Transmits audio data from the TV set to
external devices such as amplifier or speaker
set with coaxial cable.
Connect the TV set to the Internet with LAN
cable.
Owner's manual