Publicité
Les langues disponibles
Les langues disponibles
EN
Manual
Installation
Using the hose
1
Place rubber washer
Before using the hose, please place the rubber washer firmly inside the
female coupling to avoid water leak. When you use the hose for the first
time, fill and extend the hose first, then slightly stretch it to free from the
tightness of the covering bent material. Next, pour the water out of the
hose, refill and use in normal.
Note
- The hose is designed for regular irrigation
- Do not pour hot water into the hose.
- Do not leave the hose under water pressure when not in use.
- In summer, please drain the hose and keep it in shadow when not
in use.
- In winter, please drain the hose and store it indoors when not in use.
The water remaining may freeze and cause a damage to the hose.
4
1/2" or 3/4"
2
Fasten female end
Fasten the female end of the
hose to the source spigot. 3/4
inch and 1/2 inch connectors fit
typical EU-household garden hose
connections.
Note
The hose is specially designed so that it can automatically extend to
three times of its original length when the water is in the on site and
shrink back to its original length when the water is in the off site. The
hose is quite light in weight which avoids heavy work as using ordinary
bulky hose.
FlinQ Stretchable Garden Hose
3
Drain the hose after use
Please drain the hose after use.
Accordingly, the hose will
automatically shrink to its original
length.
5
Publicité
