KETRON EVM Guide Pratique page 10

REAR C ONNEC T IO NS
DIRECT WI-FI LAN
CONTROL VNC-HDMI
ETHERNET
SD CARD
HDMI
USB HOST
2x USB DEVICE
DC 9V 3,5A
SUSTAIN
VOLUME PEDAL
FOOTSWITCH
MIDI
OUTPUT
FRONT P ANEL C O NNEC T I ON S
HEADPHONE
INPUT
INPUT GAIN
MICRO OUT
MICRO GAIN
MICRO IN
48V
VOLUME
/10
Select the connection type for VNC: via WiFi or via cable.
Select the type of remote control to be used: VNC or HDMI.
Ethernet jack for wired remote control.
Slot for coneecting an external SD card (SDXC).
Standard port for transmitting video data to compatible computer monitor, video projector or
digital television.
USB-B standard port for connecting the instrument to PC as a external memory device or as an
USB MIDI controller.
USB-A standard ports for connecting external memory device, such as USB pens or HDDs.
Mains power supply socket. Please use only the power supply supplied with the instrument.
Output: 9V, 3,5A.
Standard jack (TS) for Sustain pedal connection (optional).
Standard stereo jack (TRS) for Volume pedal connection (optional).
Standard multi-pin plug for optional multi-switch pedal connection.
Can be used to control several internal functions. Compatible with Ketron FS6/FS13.
MIDI IN1 (GM), MIDI IN 2 (KEYBOARD), MIDI OUT and MIDI THRU ports for transmitting and
receiving MIDI messages with other MIDI modules and controllers.
Standard mono jack pair (unbalanced) for connecting the instrument to a PA STEREO system:
LEFT (Left Mono) and RIGHT (Right Mono). We strongly recommend using stereo connections to
get the best performance.
Standard stereo jack (TRS) for headphones connection.
The headphone volume is controlled by the Master volume.
Standard mono jack for connection of other auxiliary instruments such Keyboard, Expander,
Guitar or Dynamic Microphone.
Potentiometer for adjusting the INPUT signal gain.
Standard jack for duplicating the MICRO input signal.
Potentiometer for adjusting the Micro input signal gain.
Standard mono combo plug (TRS/XLR) for microphone connection.
Switch for 48V Phantom power for the MICRO socket.
Control the overall volume of the instrument.