Epson WF-2660 Guide Rapide page 4

■
Always load paper short edge first and make sure the edge guides are against the paper.
■
Make sure the paper does not extend past the end of the cassette.
■
After you load paper, use the control panel to select the paper size and type.
Solving Network Problems
If you have a network problem with your Epson
LCD to diagnose the cause of most problems.
You can also check the basic troubleshooting suggestions below. For more in-depth
troubleshooting, see your online User's Guide or FAQs at epson.com/support (U.S.) or
epson.ca/support (Canada).
■
Try connecting to the wireless router or access point with your computer or another
device to confirm that it is working correctly.
■
Try restarting the router (turn it off and then on), then try to connect to it again.
■
Print a network status sheet from the product's control panel.
WF-2650: Press
Status > Print Status Sheet.
WF-2660: Press
Status > Details > Print Status Sheet
■
Verify that the network settings are correct and check the signal strength. If it is poor,
try moving the product closer to your router or access point.
4
Solving Network Problems
if necessary and select
Then press u.
if necessary and select
®
product, check the messages on the
Setup > Network Settings > Network
Setup > Network Settings > Network
. Then press one of the x buttons.