Télécharger Imprimer la page

Titan TTB2700PRW Mode D'emploi page 30

Publicité

Les langues disponibles

Les langues disponibles

Operation
EN
Tips
WARNING! Prevent water from penetrating the air vents of the
product to minimise the risk of damage to the product.
1. Dissolve dirt by applying the detergent mixed with water to the surface while
still dry. Allow the detergent to rest on the surface for a few minutes, but do
not let the detergent dry.
2. When dealing with vertical surfaces work from the bottom upwards. Rinse
from the bottom upward, use the high pressure jet at a minimum distance of
30 cm at 45° angle and then from the top downward.
3. In some cases, scrubbing with brushes is needed to remove dirt. High
pressure is not always the best solution for good washing results, since it
may damage some surfaces. The highest nozzle jet setting should not be
used on delicate or painted parts, or on pressurised components (e. g. tyres,
inflation valves, etc.).
4. Effective washing depends on both the pressure and volume of the water
used, to the same degree.
5. Begin by spraying in a testing area free and clear of people and objects.
Wood and vinyl decks (ECO MODE)
1. Reduce your work area to smaller sections and clean each section one at a
time for optimal results.
2. Rinse at high pressure using fan spray, keeping the nozzle at least 15 - 25 cm
from the cleaning surface.
3. Maintain a further distance from the cleaning area when using jet spray.
4. Caution! Increase the distance from the cleaning area for softer woods.
Cement patios, stone, and brick (MAX POWER)
1. Rinse at high pressure using fan spray in a sweeping motion, keeping the
nozzle at least 7 - 15 cm from the cleaning surface.
2. Maintain a further distance from the cleaning area when using jet spray.
Cars, boats, and motorcycles (ECO MODE)
1. Clean one side at a time to achieve the best results.
2. Rinse at high pressure using fan spray in a sweeping motion, keeping the
nozzle at least 20 cm from the cleaning surface. Do not use narrow pencil jet
on vehicle or boat paint work.
3. Wipe surface dry for a polished finish.
4. WARNING! Do not clean the engine with this product!
30
96262_IM_TTB2700_4L.indb 30
96262_IM_TTB2700_4L.indb 30
TTB2700PRW byTITAN
2021/9/16 下午5:07
2021/9/16 下午5:07

Publicité

loading