Function Tests; Maintenance; Preventive Maintenance; Corrective Maintenance - ensto Smartcloser NX2008287 Manuel D'installation

3.3. Function tests

After control box commissioning:
 Proceed to several opening and closing operations from control box, in local (control box)
and distant (remote) configurations.

Neutralize the electric command using the neutralization switch located in the control box
and check that local and distance operations are correctly inhibited.
4

Maintenance

4.1. Preventive maintenance

The Smartcloser and its accessories do not require any maintenance.

4.2. Corrective maintenance

In case of corrective maintenance asked by Ensto expert, please contact Ensto after-sales service.
5

End of product life

For any question or demand about end of product life requirements, please contact Ensto after-
sales service.
SMARTCLOSER - N°IFS NX2008287 / N° 72740_08
01.10.2020
99 (101)