Audizio RP113 Serie Manuel D'instructions page 5

CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging. If the device has been
exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the
mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The
unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Headphone output
3.5mm headphone output jack
2. On/off and volume control
Rotate to turn the device on/off and to adjust the volume level
3. Mode
Rotate to change modes (USB, AUX, Phono, BT streaming)
4. Pitch
Rotate to control the pitch (turntable speed)
5. USB slot
6. Previous / BT out
Press to change to the previous track when in USB-, AUX- and BT mode
Press in Phono mode to enable a connection with a BT speaker or -headphones
7. Play/pause / REC
Press to (re)start or pause play in USB-, AUX- and BT mode
Press in Phono mode to record the vinyl play on a USB stick (when inserted)
8. Next / split
Press to skip to the next track when in USB-, AUX- and BT
mode. Press when recording vinyl play on a USB stick to cut
off and save the current file and generate another save file
9. Line output
RCA connector line output to connect external speakers (not
included)
10. AUX input
3.5 mm auxiliary input jack
11. DC 5V IN
5V power socket for connecting the supplied power adapter
12. Platter
13. 45rpm adapter
This adapter allows you to play 45RPM records
14. Tone arm lever
Use to raise/lower the tone arm
15. 33 / 45 / 78 RPM switch
Use to adjust the RPM of the turntable platter
16. Autostop switch ON/OFF
This switch turns the auto stop-function on/off. When the automatic stop is enabled, the platform will start rotating as
soon as the tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some
vinyl records stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF
17. Tone arm
18. Arm clip
This arm clip secures the tonearm while at rest or when not in use. The arm clip has been designed to remain in the up
position whilst unlocked
5