Manuels Connexes pour PATIOJOY HW68962
Sommaire des Matières pour PATIOJOY HW68962
- Page 1 3-Piece Patio Rattan Furniture Set Salon de Jardin en Rotin HW68962 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Before You Start Please read all instructions carefully. Retain instructions for future reference. Separate and count all parts and hardware. Read through each step carefully and follow the proper order. We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
- Page 4 EN: Notice 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4.
- Page 5 Part & Hardware List/ Liste des Pièces & Accessoires Right frame/Cadre droit Left frame/Cadre gauche (x2) (x2) Seat frame/Cadre de siège Back frame/Cadre de dossier (x2) (x2) Table leg frame/ Table side frame/ Cadre de pied de table Cadre latéral de table (x2) (x2)
- Page 6 KT: 450x450x5 mm Seat cushion/Coussin de siège Table glass/Verre de table (x2) (x1) Bolt M6x 30 mm/ Bolt M6 x 35 mm/ Boulon M6x30mm Boulon M6x35mm (x16) (x14) M6x1 Washers/Rondelles M6x1 Allen key M4/Clé Allen M4 (x30) (x2)
- Page 7 STEP/ÉTAPE 1: (2x Chair assembly) Connect Back frame (D) & Seat frame (C) with Bolt (2) & Washer (3) (2x assemblage de la chaise) Connectez le cadre du dossier (D) et le cadre du siège (C) avec le boulon (2) et la rondelle (3).
- Page 8 STEP/ÉTAPE 3: Connect part from Step 2 & Left Frame (B) with Bolt (1), Bolt (2) & Washers (3). Connectez la pièce assemblée de l'étape 2 et le cadre gauche (B) avec les boulons (1), les boulons (2) et les rondelles (3). STEP/ÉTAPE 4: Put on Seat cushion (G) to Complete single chair...
- Page 9 STEP/ÉTAPE 5: STEP 5 ( Table assembly) Connect Table leg frame (E) & Table side frame (F) with Bolt (1) & Washers (Assemblage de la table) Connectez le cadre du pied de table (E) et le cadre latéral de table (F) avec les boulons (1) et les rondelles (3).
- Page 10 STEP/ÉTAPE 7: Connect part from Step 6 & Table leg frame (E) with Bolt (1) & Washers (3). Connectez la pièce assemblée de l'étape 6 et le cadre du pied de table (E) avec les boulons (1) et les rondelles (3). STEP/ÉTAPE 8: Put on Table Glass (H) to complete the Table...
- Page 11 Finished/Terminé...
- Page 12 Return / Damage Claim Instructions DO NOT discard the box / original packaging. In case a return is required, the item must be returned in original box. Without this your return will not be accepted. Take a photo of the box markings. A photo of the markings (text) on the side of the box is required in case a part is needed for replacement.
- Page 13 USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville USA:cs.us@costway.com If you're having difficulty, our friendly AUS:cs.au@costway.com GBR:cs.uk@costway.com customer team is always here to help. FRA:cs.f r @costway.com...