Publicité
Les langues disponibles
Les langues disponibles
3
The electrical connection of this hob should be carried out by an
authorised service personal or a qualified electrician, according to the
instructions in this guide and in compliance with the current regulations.
· Prior to installation, ensure that the local distribution conditions and the
adjustment of the appliance are compatible.
· The laws, ordinances, directives and standards in force in the country of
use are to be followed (safety regulations, proper recycling in accordance
with the regulations, etc.)
Locating your built-in hob
After removing the packaging material from the appliance and its accessories,
ensure that the hob is not damaged. If you suspect any damage, do not use
the appliance, contact an authorised service personal or a qualified electrician
immediately.
· This built-in hob is to be inserted into a cut out of a worktop. It will be
electrically connected with the switch box below counter level, especially
provided for this purpose.
· Cut an opening with the dimensions shown in the picture below.
INSTALLATION
Neighboorhood walls
A [mm] B [mm]
Combustible
60
50
Non-combustible
25
150
50
40
Publicité
