Orbegozo BR 50 A Mode D'emploi page 16

BR 50 A
SAFE POSITIONING
1. The heater must not be located immediately below a socket outlet
2. For your own safety and that of others: water and electricity are a dangerous combination! Do not
use this
heater in the immediate surroundings of a bath, a shower or a swimming pool. Ensure that the
appliance can
not fall into water (bath wash basin, shower cubicle, etc.)
3. Please read also the safety infromation's before using.
4. Do not use the heater on extremely deep-pile carpets!
5. Do not use the heater in an upright position.
TECHNICAL FEATURES
230 V ~ 50 Hz 900 W
DESCRIPTION OF THE PARTS
Switch
ELECTRIC HEATER OPERATION
- Place the electric heater into a round occasional table*
- Press switch to "I " position.
- Plug the appliance to the electricity supply, then the heater will work in low heat setting
(400W)
- If press switch to "II " position, the heater will work on High heat setting(900W)
- Plug out to switch off the heater.
*(round occasional table)
Handles
Supply cord
16