Replacement Parts - KRAFTWERK 506.000.100 Mode D'emploi

Smart Cable LED and Alarm Behavior
BEHAVIOR
Green LED blinking; Red LED
off; no beep.
Green LED solid; Red LED off;
no beep.
Solid Red LED, Green LED off;
beeps once per second
Solid Red LED, Green LED off;
beeps twice per second
Alternating Red and Green
flashing LEDs; no beep
Solid Red LED, Green LED off;
rapid beeping
Solid Red and Green LEDs;
beeps once per second
NOTE: When the condition is corrected, the smart cable will automatically reset.
11. SPECIFICATIONS
Weight
Product dim
Internal battery type
Ternary Lithium Battery
Battery Life
Peak Current
Cranking Current
Using Cycles
USB Output
USB Type C Port
LED Light
Full Charging Time
Charging current
Operating Temperature Range
Storage Temperature Range

12. REPLACEMENT PARTS

Battery clamps for 506.000.100 ..............................................596.000.002
Micro USB to USB charging cable ..........................................596.000.003
USB adapter ...........................................................................596.000.004
Cable is connected to battery only.
Cable is connected to jump starter only.
Cable is connected correctly to both
battery and jump starter.
Low voltage protection
Reverse polarity protection
Reverse charging protection
Short circuit protection
Temperature protection
930 g / 32.80 oz
290 x 95 x 60 mm / 11.24 x 9.74 x 2.36 in
Lithium ion polymer
10000 mAh (55.5 Wh)
1000 Cycles
1000 PA
500 CA
30
5V DC / 2.4A + Quick charge 3.0™: 5V / 3A, 9V / 2A,
12V / 1.5A
3A / up to 15 W
1 W / 90 Lm
7~8 hours
5V DC / 2A
0°C~50°C / 0°F~122°F (Continuous Charge Temperature)
-20°C~60°C / -4°F~140°F (Continuous Discharge
Temperature)
-20°C~60°C / -4°F~140°F
• 11 •
REASON
EN