Blue 55BU800 Mode D'emploi page 9

Getting Started
Cable Installation
Before the installation and use, please read carefully the relevant content in "Warning
and Safety instructions".
Take out the TV from the wrapping package and put it in a drafty and flat place.
NOTE:
 When you plug or unplug the power cable, you must make sure that the TV, computer
or other equipment have been already shut down.
 When unplugging the power cable or signal cable, please hold the plug (the insulated
part); do not draw the body of the cable.
• LAN: Use a network cable to connect the interface and the broadband network
interface.
• HDMI: (High-Definition Multimedia Interface) it provides an uncompressed digital
connection that carries both video and audio data by way of an integrated mini-plug
cable.
NOTE:
 While connecting the HDMI, please aim at carefully, do not insert overexerted, for
fear the pin might be broken.
• SCART: Connect the TV set with an external device using the SCART socket.
• ANT: Connect the antenna to TV via coaxial cable on ANT jack of the back panel.
• DIGITAL AUDIO OUT:
the Digital Audio Output port.
• HEAD PHONE (
• USB2.0: Connect a USB Storage device and multimedia file playback.
• AV IN: The output AV terminal of DVD can be connected with the AV input port of the
TV through AV cable.
NOTE:
 If AV works as mini terminal, please choose to use a one-to-three audio & video
cable.
• COMMON INTERFACE: Please insert CI card into the CI slot according to the arrow
on the CI card.
NOTE:
 The range of power input for the TV is 100-240V~ 50/60Hz; do not connect the TV
power input port with the power cable out of the above range.
 Please hold the insulated part of the plug when you are unplugging the power cable,
do not touch directly the metallic part of the cable.
 Before connecting to an external device, please firstly make sure that the TV set and
the external device have been turned off. When connecting, please make reference to
the interface name and the interface color to connect the signal cable.
 The unit has a built-in wireless network card, and can directly receive network
signals from wireless router through WIFI antenna.
Send the TV's audio signal to external audio equipment via
): Connect a 3.5mm headphone for personal audio.
8