2. Unit Conversion
2-1.When power on, the default unit is g.
2-2.If the user needs to switch the unit, press button ON to start up the scale, then press UNIT
button to change, g=>lb:oz,lb:oz=>oz,oz=>ml,ml=>g
3. Weighing Operation
3-1.Firstly put the scale on flat and hard surface, press ON/TARE button to start up the scale,
screen returns to zero after full display.
3-2.Put the object on the scale, the LCD screen indicates the weight of the object; press TARE
button.
3-3.Add another item on the scale, and you will get a reading of its weight regardless of
previously measured item. Press the ON/TARE button to reset the scale to zero.
3-4.Take off all the objects, it indicates the actual negative weight, press ON/TARE to return to
zero.
4.Sign Tips
4-1. When the voltage of the battery gets low it indicates below: