Blaupunkt VIO-H30 Guide De Démarrage Rapide page 7

Step 12
Now the camera is configured, and you can enjoy live
streaming.
Step 13: Setting up motion detection and push notifications:
- Go to Device manager  select the desired camera and press the Config Device icon
press Video detect  Motion Detection and enable motion detection.
- For more information regarding motion detection please refer to the "help menu"  chapter "device
manager".
- To receive push notification on your smartphone:
o Go to Alarm manager
button to turn it ON
o Choose the push notification trigger "Motion Detect" and select "IPC"
o Press the back button and press the top right save
button to save the changes.
o Check on push configuration that the camera is not
displayed as "Close"
Note
 To know more about the App, check our Help menu.
There you will find a brief explanation for each App
menu.
 For troubleshooting go to our FAQ inside the Help menu.
 For more information about manuals, firmware versions,
etc., visit our website or contact your local service
support. http://security.blaupunkt-service.com
6
Note:
 Activating WPS (Wi-Fi Protected Setup)
 If the Wi-Fi configuration failed, please try
 If the camera registration is still not working,
 To learn in a camera to another smartphone,
 
press Push Config
function on the camera will close the Wi-Fi
configuration.
again or check the Wi-Fi password.
perform a factory reset by pressing the reset
button (see chapter 2) for 15 seconds and try
again.
use the Device card or Network search feature.
For more information refer to the "help menu".
Select the desired camera and press on the
