General information
This product is designed for specific uses. We would like to state explicitly that this product
may not be modified and/or used in a manner not in keeping with its intended use.
Changes geared towards technical improvement may be made by the manufacturer without
prior notice and may not yet be included in the instruction booklet.
Safety instructions
To prevent malfunctions, damage and adverse health effects, please follow the
instructions below:
The national fitting, installation and operating regulations must be heeded and
•
adhered to.
Installation by qualified professionals is recommended.
•
The product was developed for use as auxiliary or working headlights on motor
•
vehicles. Do not use the lights as the primary light source on the vehicle.
Use switches, cables and fuses suitable for motor vehicles.
•
Ensure that all parts are properly connected and secured to prevent them from
•
interfering with any of the vehicle's moving parts or functionality.
The cooling element on the back and the lens heat up whilst in use. These
•
elements must not be covered.
The product requires a suitable connection and power supply with appropriate
•
polarisation.
Do not let children play with the product or its packaging.
•
Be sure to avoid looking directly at the light beam.
•
9