WEMOOVE CMTV Serie Manuel Utilisateur page 10

Bluetooth remote control for Smart TV
Power On / Off*
Cursor On / Off
Enter to menu
Voice Assistant
Volume control
Batery
replacement
Batery type AAA
*You can teach the Power button from the original remote control. 1) Hold the Power for 3 sec
(you can see the red blinking indication on the smart remote). 2) Line up smart remote and
original remote head-to-head. 3) Push a button on the original remote.
**Before using the remote control you should connect it to the TV. For connecting push and hold
the buttons "V-" and "PG-" till red indicator on the RC become blinking. Then go to the BT
settings on the TV and pair to the HBG_RC device.
***For calibration Airmouse push and hold buttons "OK" and "HOME" till indicator is on.
Then put the remote control on the flat horizontal surface for 3 seconds. Once the red
indicator is off you can use the remote control.
Smart TV
x 2
Copyright WEMOOVE – Tous Droits Réservés WEMOOVE – 2024
On / Off sound
Browser
Arrow and ENTER for
menu navigation / The
list of TV channels
Back
Channel switching/
Page scroll in browser
5