Publicité
Les langues disponibles
Les langues disponibles
1
NOTICE
A 110 V GFCI outlet is
required.
> Mark the holes to be
drilled for the anchors.
5
> Remove the mirror front.
9
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
2
Ø ⅜"
> Use a 3/8" drill bit.
> Drill the anchor holes that
have been marked.
6
> Check the mirror frame
is leveled and securely
attached to the wall.
10
1x S8
> The plastic anchor
provided is for concrete
wall application.
3
4x S8
> The plastic anchors
provided are for concrete
wall applications.
7
> Check the screws which
allow adjustments of the unit.
> The top screw will adjust
front to back.
> The bottom screw will adjust
up and down.
> Make adjustment to the level
as needed.
11
1x 4,5x70
> For wood stud walls bolt
should be screwed into
wood bracking.
4
4x 5,5x50
> Screw the bracket(s) to
the wall at the specified
location.
> For wood stud walls, bolts
should be screwed into
wood backing.
8
> Mark the hole to be drilled
for anchor.
12
> Plug the unit into outlet.
MAL_Starck_S19641/19.04.2
6
Publicité
