Publicité
Ethernet ports (3)—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to
wired devices on your network.
Note—For best performance, use CAT5e or higher rated cables on the Ethernet ports.
Reset button (4)—Press and hold until the illuminated Linksys logo turns off to reset the router to
factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the internet
or mobile app.
USB 3.0 ports (5)—Connect and share USB drives on your network or on the internet.
Power port (6)—Connect the included AC power adapter.
Power switch (7)—Press | (on) to turn on the router.
Side view
Wi-Fi Protected Setup™ button—Press to connect to WPS-enabled network devices.
5
Publicité
