Publicité
Les langues disponibles
Les langues disponibles
Digital Audio Broadcasting (DAB)
To receive DAB signals, connect a DAB antenna (AN-DAB1) (sold separately) to the unit.
Seeking a service component/station
1
Press SRC/OFF to select [DIGITAL RADIO].
2
Press BAND/
to select the band from [D1], [D2] or [D3].
3
Press
/
to select a service component/station.
NOTE
Press and hold
/
then release to seek an available service. Scanning stops when the unit
receives a service.
To select service component/station from service lists
1
During DAB reception, press
Displays the list of all service components/stations. Press
service component/station alphabetically.
2
Select a service component/station from the list you selected, then press the M.C.
dial to confirm.
NOTE
You can update the service list by pressing and holding
again.
Presetting service components/stations
To store service components/stations
1
While receiving the service component/station you want to store, press and hold
one of the number buttons (1/
To retrieve stored service components/stations
1
Select the band, then press a number button (1/
6
En
.
again to search for a
. To cancel updating, press and hold
to 6/
) until it stops flashing.
to 6/
).
Radio
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
3
Press a number button (1/
to 6/
TIP
The
/
buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the
FUNCTION settings (page 11).
Best stations memory (BSM)
The six strongest stations are stored on the number buttons (1/
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, press
Press and hold
/
then release to seek an available station. Scanning stops
when the unit receives a station. To cancel seek tuning, press
NOTE
[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 11).
To store stations manually
1
While receiving the station you want to store, press and hold one of the number
buttons (1/
to 6/
) until it stops flashing.
).
to 6/
).
/
to select a station.
/
.
Publicité
