Publicité
Installation
Take out the Salamander from the packaging and locate the unit on a firm level surface.
When this appliance is to be positioned in close proximity to a wall, partitions, kitchen furniture, decorative
finished, etc., it is recommended that they be made of non-combustible material, if not, they shall be clad with
a suitable non-combustible heat-insulating material, and that the closet attention be paid to fire prevention
regulations.
Once the Salamander has been placed in position by consulting International Standards and regulations. You
can choose put on the table or hang on the wall. The Toaster Griller is ready to operate.
Operation
Plug in the power, the red indicator light will be lit. Turn the energy regulator dial to required position, the
elements will start heating. You can adjust the heating height according to what food you are cooking. When
finished, turn the energy regulator dial back to the '0' position and unplug the unit.
Maintenance
The Salamander should be cleaned using warm, soapy water after each day's operation.
After cleaning, be sure the trays should be dry before putting them back to the unit.
Do not immerse completely in water to clean.
HELP
If the Salamander does not work, please check the following:
1. The power supply is correct.
2. The elements are clear.
REFERENCE
Item Number Model Number
Description
Manufacturer Model Number
Salamander Grill Single 1/1 Quartz
43450
CE-CN-1506-S
PA10632
240V/60HZ 3200W QPS
6
Publicité
