Kathrein EXE 1512 Mode D'emploi page 12

Kathrein Power Saving
If an EXE 1512 is operated alone or together with other multi-switches that bear the
Kathrein Power Saving logo, Kathrein Power Saving can be activated by setting the
stand-by switch to "ON". If a receiver in the cascade is switched on, the LNB is powered
through the end multi-switch.
Multischalter ohne Kathrein-Power-Saving geben keine Signalisierung an
den End-Multischalter. Der Stand-by-Schalter muss für eine dauerhafte
Versorgung des LNB auf „OFF" stehen.
PIN code protection
The multi-switch is protected by a PIN code in order to prevent the set userband from
being used/disturbed by another subscriber. This should be specified in the receiver
settings. A fixed PIN has been assigned to each userband.
UB 1
Frequency
974
(MHz)
PIN 151
UB 2 UB 3 UB 4
1076 1178 1280
052 133 124
UB 5 UB 6 UB 7
1382 1484 1586
205 196 187
4 / 8
UB
UB 8 UB 9
10
1688 1790 1892
178 099 232
UB UB
11 12
1994 2096
198 111