Publicité
Les langues disponibles
Les langues disponibles
DO NOT touch the heat dissipation component to avoid burns.
DO NOT expose the device to extremely hot, cold, or humidity
environments. For temperature and humidity requirements, see device
specification.
No naked flame sources, such as lighted candles, should be placed on
the equipment.
DO NOT touch the sharp edges or corners.
To prevent possible hearing damage, DO NOT listen at high volume
levels for long periods.
This equipment is suitable for mounting on concrete or other
non-combustible surface only.
Never place the equipment in an unstable location. The equipment may
fall, causing serious personal injury or death. Install safety protection
equipment if necessary. Check regularly.
This equipment is suitable for mounting on concrete or other
non-combustible surface only.
If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
If the device cannot work properly, contact the store you purchased it or
the nearest service center. DO NOT disassemble or modify the device in
the unauthorized way (For the problems caused by unauthorized
modification or maintenance, the company shall not take any
responsibility).
Keep all packaging after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original packaging. Transportation without the original packaging may
result in damage to the device and the company shall not take any
responsibility.
The disconnect device shall be provided as part of the building
installation.
6
Publicité
