Axis W120 Guide D'installation page 18

• Do not leave the product or batteries in extremely low
or high-temperature surroundings, which can result in
leakage of flammable liquid or gas.
• Do not subject the product or batteries to low air
pressure that may result in an explosion or leakage of
flammable liquid or gas.
WARNING
• Always charge the product using an Axis body worn
docking station or a 5.0 V USB-C power supply that
meets the UL/IEC LPS or PS2 requirements. Never
attempt to charge the product by any other means.
• The 3.0 V MS621T battery is not designed to be
replaced. Please contact Axis support or your Axis
reseller for service matters.
• If needed the 3.7 V ID1058 rechargeable lithium
battery can be replaced using the AXIS TW1906
Battery Kit 5P.
• Never expose batteries to excessive heat such as
sunshine, fire or similar.
• Always dispose used batteries according to local
regulations or the battery manufacturer's instructions.
Note
Do not replace the 3.7 V ID1058 battery during the period
under which the Axis Hardware Product is covered by the
Axis 3-year Limited Hardware Warranty. Replacement of
the battery carried out by any other party than Axis during
the warranty period voids the main item's warranty.
Contact Axis Support or your reseller for matters regarding
the battery or other service-related matters.
18